5L Lockable Jerry Can
Suitable for use on Motorcycles.
Rust Proof / Crush Resistant and Non-Corroding
Designed with ventilation holes to prevent negative pressure backflow.
External pressure up to two tons - altitude drop without deformation.
Could be installed on mount or roof rack.
Material : High-density Polyethylene Plastic
Automatic Shut-off Nozzle.

5L Plastic Jerry Can
Long-lasting Durable / High-density Polyethylene
Long Spout for easy tank access
with Press and Pour Automatic Shut-off Nozzle.
Great for ride-on mowers and large equipment such as generators.
Cap incorporates child lock.

10L Plastic Jerry Can
Long-lasting Durable / High-density Polyethylene
Long Spout for easy tank access
with Press and Pour Automatic Shut-off Nozzle.
Great for ride-on mowers and large equipment such as generators.
Cap incorporates child lock.

20L Plastic Jerry Can
Long-lasting Durable / High-density Polyethylene
Long Spout for easy tank access
with Press and Pour Automatic Shut-off Nozzle.
Great for ride-on mowers and large equipment such as generators.
Cap incorporates child lock.

Oil Drain Pan - 2 litre for Motorcycles

Drip Tray
940 x 630 x 30mm
Manufactured from 1mm plastic
Ideal when transferring fluids to avoid workshop floor contamination.
Also protect your drive or garage floor from oil and antifreeze spillage
which can be harmful to pets.

Stainless Steel Drip Tray
600 x 400mm / 48mm deep.

8L Oil Drain Pan
Easy to clean durable plastic construction
with 8 Litre capacity ideal for antifreeze and oil.
Wide pan with pouring lip for clean disposal of fluids
plus shallow sides to allow easy positioning under vehicle.
Suitable for DIY use or the professional garage mechanic.

16 litre Oil Drain Pan
Ideal for the Professional and Enthusiast Mechanic

10 litre Fluid Draining Tank
for Oil or Water
For professional mechanics or the DIY the user.
Concave drain surface and large spout with
secure screw cap prevents any loss while transporting fluids.
Strong durable plastic with moulded handles top and bottom.

3pc Fluid Lock Set
Size range : 4.2mm - 10mm.
Three anodised aluminium bodies with composite screw.
For Clamping and sealing metal flared pipes on braking systems
also cooling system bypass / fuel pipes and AC pipes etc.
Provides an effective seal to metal brake pipes when the braking system has been opened.
Size range : 4.2mm - 10mm.
Prevents brake fluid loss and contamination of the work area.

6pc Brake Bleed Wrench Set
Sizes : 7 | 8 | 9 | 10 | 11 | 12mm - 12 point
Combined Wrench / Socket and Nipple Connector.
Ideal for bleeding brake and hydraulic clutch systems without removing the wheels.
1.2M silicon hose with check valve for safety operating.
For universal bleeder nipples.

Brake Bleed Catch Bottle Kit
Simple to use.
Everything needed to quickly bleed brakes with no mess.
Plastic bottle collects discharged fluid.
Three separate adapters fit the common bleeder screws.

Brake Bleeder Kit
With 3 Adaptors and Hoses
with Magnetic Pad for securing Bottle while in use

1L Brake Fluid Bleed Bottle
With holding chain and hook.
Variable length bleeding hose.
Bleeding nipple adaptor.

Professional Brake Bleeder
1 litre Capacity
with 1/4in Air Fitting
Air Pressure : 90 - 120psi

Brake Fluid Bleed System
with PCL Air Fitting
Working Pressure : 6 - 12 Bar
Suitable for one-man operation anf clutch systems

Brake Fluid Bleed Kit
with fluid supply bottle.
Uses workshop air supply 90 to 120psi.
Quick clean and efficient operation
without specialized brake reservoir caps.
Draws the brake fluid from brake nozzle.
Flexible rubber joint for fluid extractions.

2pc Pneumatic Brake Extractor / Refill Kit
Kit contains a vacuum fluid extractor, bleeding hose
and automatic refill bottle with New safety design.
Automatic shut off when the tank is full.
Working pressure : 70 -170psi
Air inlet : 1/4in.
Tank Capacity : 2.0L
Bottle Capacity : 1.0L
Air consumption : 5 cfm

Brake or Clutch Bleeding System
Suitable for use with ABS systems.
One-man bleeding system requiring no external power source.
2.5 litre tank allows flushing the entire system
with one fill without the risk of running the reservoir dry.
42mm diameter cap suitable for most European vehicles.
Working Pressure : 2 Bar / 30psi
Max. Pressure : 5 Bar / 70psi
NOW with 1 litre Suction Tank.

Brake Fluid Bleeder
with 4 Litre and 1 Litre suction containers.
For quick and easy extraction without a second person.
Venting requires no external power source.
Easy filling and cleaning.
With E20 adaptor suitable for European vehicles.
Working pressure : 30psi

Vacuum / Pressure Pump and Brake Bleeding Kit - 21pc
Checks vacuum and pressure operated automotive components
Can be used to bleed hydraulic systems or siphon fluids

Electric Brake Fluid Bleeder
For most makes and models of vehicles
With Adjustable pulse oil change which can effectively
clean the pipeline and change the oil more thoroughly.
Contents : Brake Fluid Bleeder / 2L Bottle & 3.5M Hose / 3 Adaptors.
Power supply : 240V | 50 / 60Hz | 35W
Output Pressure : 0.6 - 3.0 Bar
Output flow : <= 1.2L / Min
Noise Level : 70 Db
Device shuts off when container is empty

Brake and Clutch Master Cylinder Pressure Test Kit
Adaptors install directly into master cylinder access holes
Measures pressure at front or back of master cylinder
Pressure gauge 0 - 300 psi and is accurate to 4% of scale
JIC quick disconnect for easy connection