Section 8.20

JOB SITE Tools & Equipment

Hot Air Gun

CT3098

Hot Air Gun - 2000W

230V Hot Air Gun
with Over Heating Protection
Supplied with 4 different Nozzles
Power 2000W
Temperature 300 degrees C / 600 degrees C
Air Flow - 300L/m to 600L/m
Useful for a variety of decorating applications

Hot Air Gun
t Click picture for more information
12V Air Compressor with Air Brush Kit

CT3745

Air Brush and Compressor Kit

230V Air Brush and Compressor Kit
Lightweight and portable
Output : 12V DC | 1.6 amp
Air volume : 10.5 L/pm
Max. Pressure : 25psi / 0 - 4 bar
Needle / nozzle diameter : 0.3mm
Gravity fluid cup : 7cc
Spray distance : 50 - 100mm

12V Air Compressor with Air Brush Kit
t Click picture for more information
Mini Grinder / Rotary Tool Kit

CT2818

Rotary Tool Set - 230V

234pc Rotary Tool Kit
Voltage : 230V / 135W / 50Hz
No-load speed :10000-32000rpm
Collet size : 3.2mm
With 233 accessories

Mini Grinder / Rotary Tool Kit
t Click picture for more information
Electric Engraver

CT1670

Electric Engraver - 230V

Electric Engraver
Voltage : 230V
Frequency : 50Hz
Input power : 13W
No load speed : 6000/min
S2 : 30min
Includes : Engraving Bit and 2 Stencils
For engraving metal / glass / wood / plastic / ceramics and leather.

Electric Engraver
t Click picture for more information
Screwdriver and Bit Set

CT0620

Screwdriver and Bit Set - 42pc

42pc Screwdriver and Bit Set with Driver Handle
Flat | Hex | Phillips | Pozidriv | Star Bits
Flat | Phillips | Stubby and Insulated Screwdrivers

Screwdriver and Bit Set
t Click picture for more information
Tool Set in Bamboo Box

CT5722

Tool Set - 108pc in Bamboo Box

108pc Tool Set with Bamboo Wood Case
1/4in.Dr Sockets : 4 | 4.5 | 5 | 5.5 | 6 | 7 | 8 | 9mm
3/8in.Dr Sockets : 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 19mm
Adaptors : 3/8in.F x 1/4in.M / Bit adaptor : 1/4in.Dr
3/8in.Dr Ratchet and Extension Bars : 75mm / 150mm
Bit Set and Screwdrivers : 2 | 3 | 4 | 6 | 8mm - Ph00 | Ph1 | Ph2
Hex Wrench Set : 1.5 | 2 | 2.5 | 3 | 4 | 5 | 6 | 8 | 10mm
Spanners : 6 | 7 | 8 | 9 | 10
11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22mm
Voltage Tester : 240V | 5M Tape Measure | 150mm Hacksaw
Pliers | Water Pump Pliers | Crimping Pliers | File | Hammer | Snap-Off Knife.

Tool Set in Bamboo Box
t Click picture for more information
20 Volt Cordless Grease Gun

CT5960

Cordless Grease Gun - 20V

20V Li-ion Cordless Grease Gun
Includes 20V Battery and 4.0Ah Fast Charger.
Rated Voltage : 20V DC
Input Voltage : 230V AC | 50/60Hz | 105W
Max. Pressure : 10000psi / 690Bar
Max. Flow Rate : 200g/min
Max. Capacity : 470ML
Hose Length : 1M

20 Volt Cordless Grease Gun
t Click picture for more information
18 Volt Cordless Impact Wrench

CT3995

Cordless Impact Wrench - 18V

18V Cordless Impact Wrench
1/2in.Dr with 18V 4.0AH Li-Ion Battery.
Max torque : 600Nm.
No load speed : 0 - 1600rpm.
Max impact rate : 0 - 3200bpm.
Battery Charger included.
100 minute quick charger.

18 Volt Cordless Impact Wrench
t Click picture for more information
Replacement 18V Battery

CT2858

Spare Battery - 18V

18V 4.0AH Li-ion Battery
for CT1646 / CT3994 / CT3995

Replacement 18V Battery
t Click picture for more information
Portable Air Compressor

CT4620

Air Compressor - Portable

Portable Air Compressor
with Tyre Inflation Gauge and Attachments
Voltage : 230V / 50Hz
Rated output power : 1100W
Operating mode type : S3 15 percent
Compressor speed : 3550rpm
Theoretical suction power : 180 L/min
Max. working pressure : 8 bar
Protection class : II / IP20

Portable Air Compressor
t Click picture for more information
Tyre Lever Set : 12 inch

CT2661

Tyre Lever Set - 2pc

2pc Tyre Lever Set
Both 12in. / 300mm
Chrome Vanadium
Supplied in a Pouch

Tyre Lever Set : 12 inch
t Click picture for more information
Electric Winch

CT0711

Electric Winch - 2000lb

12V Electric Winch
Rated Voltage : 12V DC
Motor : 1.7kw / 2.3hp
Capacity : 2000lbs / 907kg
Cable length : 15m
Cable diameter : 4mm
Reversible
Ideal for Horizontal Winching - Boats / Tree Stumps and Vehicles
Please be advised that the Winch Rollers shown on the box are NOT Included.

Electric Winch
t Click picture for more information
Electric Winch

CT0712

Electric Winch - 2000lb

2000lb Electric Winch
Power Supply : 12V DC
Rolling Capacity : 6000lb
Pulling Capacity : 2000lb
Cable Length : 30ft / 9.1M
Maximum Boat Weight : 5000lb
Line Speed with load : 6ft /1.8M p/min
Weather resistant high-impact housing with folding handle.
Mounts securely to your trailer to provide pulling power
for boats / vehicles and other loading jobs.

Electric Winch
t Click picture for more information
EVA Kneepad

CT5584

Mechanics Kneepad

EVA Work Mat
Kneeling Mat for workshop and general use
Kneeling : 440 x 300 x 40mm

EVA Kneepad
t Click picture for more information
Tool Box with Handle

CT1475

Tool Box

20in.Portable Steel Tool Box with 4 Drawers
All-steel construction and built to last.
Ball-bearing drawer slides allow for ease of use.
Cantilever tray under the lid helps organize small parts.
Supplied with 2 keys.
Dimensions : 520 x 220 x 370mm
4 Drawers : 445 x 190 x 57mm / each size.
Cantilever Tray : 95 x 185mm

Tool Box with Handle
t Click picture for more information
Roller Tool Cabinet with Tools

CT3323

Tool Cabinet - 7 Drawer plus Tools

7 Drawer Roller Cabinet with Tools
1/4in.Dr Sockets : 4 - 14mm
3/8in.Dr Sockets : 8 - 19mm
1/2in.Dr Sockets : 10 - 32mm
Universal Joints | Reversible Ratchets | Extension Bars
Spanner Sets : 6 - 27mm
Screwdrivers | T-Handle Drivers | Socket Bits and Bit Adaptor
Pliers | Hammer | Parallel Pin Punches

Roller Tool Cabinet with Tools
t Click picture for more information
Stainless Steel Mobile Workbench

CT5534

Mobile Workbench - 61in.

Workbench with Flip-top Stainless Steel Top
Product Dimensions : W x D x H - 1550 x 610 x 825mm
Full extension soft-closing drawer slides support up to 35kg or 60kg.
Steel construction with rust-resistant black powder coat finish.
Lift-up surfaces supported by gas struts 2.
Steel storage bins within storage compartments below work surface.
Six swivel casters - 4 with toe locks can support up to 700kg.
Internal keyed locking system with 2 keys provide added security.
Power Charging Station and Power Strip with USB ports.
Aluminium Corner Guards to protect unit from dings and dents.

Stainless Steel Mobile Workbench
t Click picture for more information
Mobile Workbench and Tool Cabinet

CT5676

Mobile Workbench - 66in.

66in. Mobile Workbench and Tool Cabinet
10 Drawer Steel Roller Cabinet with -
Heavy Duty Ball Bearing Slides and auto return function
plus 2.5mm non-slip drawer liners.
Storage with adjustable shelves
TPR Casters : 6 x 2in. Swivel and Lockable.
Central locking system with cylinder locks.
Product Size: 1672 x 501 x 859mm

Mobile Workbench and Tool Cabinet
t Click picture for more information
Propane Space Heater

CT2140

Space Heater - Propane 15KW

15Kw Propane Space Heater
Rated Voltage : 230V / 50Hz
Rated Input : 70W
Maximum Heat Output : 15Kw
Type : A3
Air Flow : 580 cubic metres per hour
Fuel Consumption : 1.09kg/h
Gas Supply Pressure : 0.7Bar

Propane Space Heater
t Click picture for more information
Propane Space Heater

CT2141

Space Heater - Propane 30KW

30Kw Propane Space Heater
Rated Voltage : 230V / 50Hz
Rated Input : 70W
Maximum Heat Output : 30Kw
Type : A3
Air Flow : 1000 cubic metres per hour
Fuel consumption : 2.18kg/h
Gas supply pressure : 0.7Bar

Propane Space Heater
t Click picture for more information
Diesel Space Heater

CT2142

Space Heater - Diesel 30KW

30Kw Industrial Direct Diesel Heater
Rated Voltage : 230V / 50Hz
Rated Input : 230W
Maximum Heat Output : 30Kw
Tank Capacity : 34L
Air Flow : 750 cubic metres per hour
Fuel Consumption : 2.4kg/h
Pressure : 0.31Bar

Diesel Space Heater
t Click picture for more information
Diesel Space Heater

CT2143

Space Heater - Diesel 70KW

70Kw Industrial Direct Diesel Heater
Rated Voltage : 230V / 50Hz
Rated Input : 430W
Maximum Heat Output : 70kW
Tank Capacity : 69L
Air Flow : 1300 cubic metres per hour
Fuel Consumption : 5.4kg/h
Pressure : 10.5Bar

Diesel Space Heater
t Click picture for more information
Inverter / Welding Machine

CT2230

Welding Machine - 200A

Inverter MMA Portable Welding Machine
Voltage : 230V
Frequency : 50Hz
Rated Input : 8.2KVA
No-load Voltage : 65V
Current Range : 10 - 200A
Usable Electrode Diameter : 1.6 - 5.0mm
Rated Duty Cycle : 60 percent at 200A
Protection Class : IP21

Inverter / Welding Machine
t Click picture for more information
Pipe Threader - 1/2 - 1-1/4in.

CT5716

Pipe Threader - 1/2 - 1-1/4in.

Portable Pipe Threader
Range : 1/2in. - 1-1/4in.
Voltage : 220V / 50Hz
Input : 1700W / Output : 1020W
Speed : 25rpm
Die Stocks : 1/2 | 3/4 | 1 | 1-1/4in.
Suitable for threading various water / electric or gas pipes.
High-performance power threading without the use of a vice.
Universal type.

Pipe Threader - 1/2 - 1-1/4in.
t Click picture for more information
Pipe Threader - 1/2 - 2in.

CT5715

Pipe Threader - 1/2 - 2in.

Portable Pipe Threader
Range : 1/2in. - 2in.
Voltage : 220V / 50Hz
Input : 1700W / Output : 1020W
Speed : 30rpm for threading and 55rpm reverse.
Die Stocks : 1 /2 | 3/4 | 1 | 1 -1 /4 | 1 -1 /2 | 2in.
Suitable for threading various water / electric or gas pipes.
High-performance power threading without the use of a vice.
Universal type.

Pipe Threader - 1/2 - 2in.
t Click picture for more information
Pipe Vice / Stand

CT5717

Pipe Vice / Stand

Tripod Chain Vice Pipe Stand
For increased convenience handling pipes and fittings
when using sealants or soldering and any other job-related materials.
Ideal when working with larger pipes and handling other bulkier materials
Capacity : 1/2 - 6in. / 12.5 - 150mm.

Pipe Vice / Stand
t Click picture for more information
60 Watt Digital Soldering Station

CT5611

Soldering Iron - 60W

60W Digital Soldering Station
Voltage / Power : 230V / 50Hz / 60W
Working Temperature : 200 - 450 degrees
With Solder Iron Tips and solder - 1mm and 1.5mm diameter
Pre-set temperatures for quick selection : 200 / 300 / 400 degrees.
Variable temperature from 200 to a maximum of 450 degrees.
With practical storage compartment for soldering tips and wire.

60 Watt Digital Soldering Station
t Click picture for more information
Cordless Work Light

CT1805

LED Work Light - Cordless

Cordless LED Work Light
30 LEDs producing 200Lm
Integral Battery : 2Ah Li-ion
Charger : 100 - 230V
Magnetic Base and Hook

Cordless Work Light
t Click picture for more information
Petrol Generator Inverter

CT4540

Generator - Petrol

3kw Petrol Inverter Generator
AC Voltage : 230V / 50Hz
AC Output : 3100W
DC Output : 12V / 8.3A
Fuel Tank Capacity : 6L
Working Time : 8 Hours
Noise Level : 61dbA
Engine Type: 4 Stroke / OHV
Max. power Output : 4.5Kw / 4000rpm
Maximum Torque: 11.2Nm/2500rpm

Petrol Generator Inverter
t Click picture for more information
Petrol Generator Inverter

CT5605

Generator - Petrol

3kw Petrol Inverter Generator
AC Voltage : 110V / 60Hz
AC Output : 3100W
DC Output : 12V / 8.3A
Fuel Tank Capacity : 6L
Working Time : 8 Hours
Noise Level : 61dbA
Engine Type: 4 Stroke / OHV
Max. power Output : 4.5Kw / 4000rpm
Maximum Torque: 11.2Nm/2500rpm

Petrol Generator Inverter
t Click picture for more information
6.5HP Petrol Generator

CT1900

Generator - Petrol 6.5hp

6.5HP Petrol Generator
4-stroke single cylinder air cooled engine with
Electric Ignition or Recoil Start and Oil Alert System
Rated Voltage : 115V / 230V
Frequency : 50Hz
Rated Output : 2.0KW - approx
Max. Output : 2.2KW - S2.2min
Engine : 196cc / 6.5HP
Fuel Capacity : 13L

6.5HP Petrol Generator
t Click picture for more information
8KW 1 Phase Diesel Generator

CT1877

Generator - Diesel

8KW Silent Diesel Generator - Single Phase
Rated / Max. Power : 8KW / 8.5KW
Rated Voltage : 230V
Rated Frequency : 50Hz
Rated Current : 34.7A
DC Output : 12V / 8.3A
Power Factor : 1.0
Displacement : 667cc
Fuel Tank Capacity : 28L
Rated Class : IP23M

8KW 1 Phase Diesel Generator
t Click picture for more information
8KW 3 Phase Diesel Generator

CT1878

Generator - Diesel

8KW Silent Diesel Generator 3 Phase
Rated / Max. Power : 8KW / 8.5KW
Rated / Voltage : 230V / 400V
Rated Frequency : 50Hz
Rated current : 8.5 / 11.5A
DC Output : 12V / 8.3A
Power Factor : 0.8
Displacement : 667cc
Fuel Tank Capacity : 28L
Rated class : IP23

8KW 3 Phase Diesel Generator
t Click picture for more information
Diesel Generator

CT0012

Generator - Diesel

10Hp Diesel Generator / 3 Phase
Rated / Max. Power : 4.5Kw / 5Kw
AC Output : 400V / 230V / 50Hz
DC Output : 12V / 8.3A
Power Factor : 0.8 cosf
Displacement : 406cc
Fuel Tank Capacity : 16L
Net / Gross Weight : 148kg / 159.5kg
Measurements : 94.5 x 55 x 70cm

Diesel Generator
t Click picture for more information
Diesel Generator

CT0405

Generator - Diesel

10Hp Diesel Generator / Single Phase
Rated / Max. Power : 4.5Kw / 5Kw
AC Output : 115V / 230V / 50Hz
DC Output : 12V / 8.3A
Power Factor : 1.0 cosf
Displacement : 406cc
Fuel Tank Capacity : 16L
Net / Gross Weight : 148kg / 159.5kg
Measurements : 94.5 x 55 x 70cm

Diesel Generator
t Click picture for more information
Demolition Hammer - 230V

CT0903

Demolition Hammer - 230V

Electric Hammer Chisel
Rated voltage : 230V / 50Hz
Rated Power : 1500W
Impact Rate : 1900 bpm
Flat and Point chisels
Hex Wrench | Oil pot | Wrench

Demolition Hammer - 230V
t Click picture for more information
Demolition Hammer - 110V

CT0904

Demolition Hammer - 110V

Electric Hammer Chisel
Rated voltage : 110V / 60Hz
Rated Power : 1500W
Impact Rate : 1900 bpm
Flat and Point chisels
Hex Wrench | Oil pot | Wrench

Demolition Hammer - 110V
t Click picture for more information
800W Impact Drill with 13mm Chuck

CT2729

Impact Drill - 230V - 13mm Chuck

Impact Drill - 230V / 800W / 50Hz
Chuck Size : 13mm
No-Load Speed : 3000 rpm
With Adjustable Handle and Chuck Key

800W Impact Drill with 13mm Chuck
t Click picture for more information
20 Volt Cordless Impact Drill

CT5952

Cordless Impact Drill - 20V

20V Li-ion Cordless Impact Drill
20 + 3 settings with 13mm Chuck.
with Brushless Motor
Includes Battery and 4.0Ah Fast Charger.
Rated Voltage : 20V DC.
No-load Speed : 0-500 / 0-2000min.
Impact Rate : 0-7500 / 0-30000bpm.
Max Torque : 80Nm.
Charger Input voltage : 230V AC | 50/60Hz
Charging Time : 1H.

20 Volt Cordless Impact Drill
t Click picture for more information
20 Volt Cordless Impact Screwdriver

CT5953

Cordless Impact Screwdriver - 20V

20V Li-ion Brushless Impact Driver
with Brushless Motor
Includes Battery and 4.0Ah Faster Charger.
Voltage / Frequency : 20V DC | 105W | 50 / 60Hz
No Load Speed : 0-1600 / 0-2000 / 0-2600min -1
Max. Torque : 180 Nm
Impact Rate : 0 - 1800 / 0 - 2500 / 0 - 3300bpm
Driving Shank : 1/4in. Hex
Input Voltage : 21V DC 4.0A.
Charger : 230V

20 Volt Cordless Impact Screwdriver
t Click picture for more information
20 Volt Cordless Hammer Drill

CT5954

Cordless Hammer Drill - 20V

20V Li-ion Cordless SDS Rotary Hammer Drill
with Brushless Motor
Includes Battery and 4.0Ah Fast Charger.
Rated Voltage : 20V DC. | 105W
No-load Speed : 0 - 1150/min
Impact Rate : 0 - 5100bpm
Impact energy : 2.8J
Charger Input voltage : 230V AC | 50/60Hz
Charging Time : 1H.
26mm Chuck and SDS Drill Bit Accessories

20 Volt Cordless Hammer Drill
t Click picture for more information
20 Volt Cordless Tool Battery

CT5950

Battery Pack - 20V

20V / 4.0AH Lithium-Ion Battery Pack
for JobSite Cordless Range
Will fit the following Tools -
CT5952 | CT5953 | CT5954 | CT5955
CT5956 | CT5957 | CT5958 | CT5959

20 Volt Cordless Tool Battery
t Click picture for more information
20 Volt Cordless Tool Battery Charger

CT5951

Battery Charger - 20V

20V / 4.0AH Battery Pack Carger
with 230V UK 3 Pin Plug
for JobSite Cordless Range
Will fit the following Tools -
CT5952 | CT5953 | CT5954 | CT5955
CT5956 | CT5957 | CT5958 | CT5959

20 Volt Cordless Tool Battery Charger
t Click picture for more information
Cobalt Drill Set

CT5553

Drill Set - 19pc HSS

19pc HSS Cobalt Drill Set
135 degree split point with 5 percent Cobalt
Sizes : 1 | 1.5 | 2 | 2.5 | 3 | 3.5 | 4 | 4.5 | 5 |
5.5 | 6 | 6.5 | 7 | 7.5 | 8 | 8.5 | 9 | 9.5 | 10mm

Cobalt Drill Set
t Click picture for more information
Cobalt Drill Set

CT5554

Drill Set - 25pc HSS

25pc HSS Cobalt Drill Set
135 degree split point with 5 percent Cobalt
Sizes : 1.0 | 1.5 | 2.0 | 2.5 | 3.0 | 3.5 | 4.0 | 4.5 | 5.0 | 5.5 | 6.0 | 6.5
7.0 | 7.5 | 8.0 | 8.5 | 9.0 | 9.5 | 10.0 | 10.5 | 11.0 | 11.5 | 12.0 | 12.5 | 13.0mm

Cobalt Drill Set
t Click picture for more information
230V Router

CT0800

Router - 230V 1/2in. Shank

Router with 1/2in. Shank
Include 3 Router Bits : 8 | 10 | 12mm
230V / 50hz / 1500W
8000 - 23000 rpm
Max. Cutting Depth : 48mm
Includes : Spanner / Dust Port / Parallel Guard

230V Router
t Click picture for more information
230V 100mm Biscuit Jointer

CT0957

Biscuit Jointer - 230V 100mm

Biscuit Jointer - 100mm
Power / Voltage : 900W / 230V / 50Hz
No load speed : 10800rpm
TCT Blade : 100mm Diameter with 6 Teeth
Max. Material Thickness : 0 - 30mm
For Biscuit Sizes : 0 | 10 | 20
Fine Depth Adjustment : 3 | 10 | 12.3 | 19mm
Fence Angle Setting : 0 - 90 / 90 - 135 degrees
With dust collection bag / hex key and spare carbon brush.

230V 100mm Biscuit Jointer
t Click picture for more information
230V Electric Nibbler

CT5559

Nibbler - 230V / 380W

Electric Nibbler
230V / 380W / 50hz
No load speed : 1800/min
Cutting thickness - Sheet Steel : 0.5 - 1.8mm | Stainless Steel : 0.5 - 1.2mm
Cuts metal under 1.8mm thick in any direction and to any shape -
Leaving smooth cutting surface with no burrs.
Cutter may be ground to restore cutting efficiency.

230V Electric Nibbler
t Click picture for more information
20 Volt Cordless Angle Grinder

CT5955

Cordless Angle Grinder - 20V

20V Li-ion Cordless Angle Grinder
with Brushless Motor
Includes 20V Battery and 4.0Ah Fast Charger.
Rated Voltage : 20V DC
No Load Speed : 3000 - 10000/min
Disc Size : 5in. / 125mm diameter
Spindle Thread : M14
Charger Input voltage : 230V AC | 50/60Hz | 105W
Charging time : 1H

20 Volt Cordless Angle Grinder
t Click picture for more information
110 Volt Angle Grinder - 115mm

CT1869

Angle Grinder - 115mm 110V

110V Angle Grinder - 115mm
Input Power : 750W
Frequency : 50 / 60Hz
No-load speed : 11000rpm
Disc diameter : 4.5in. / 115mm

110 Volt Angle Grinder - 115mm
t Click picture for more information

 

Next Last

Product Search

Search Icon
Section 1 Icon Section 2 Icon Section 3 Icon Section 4 Icon Section 5 Icon Section 6 Icon Section 7 Icon Section 8 Icon Section 9 Icon Section 10 Icon

Cannon Tools Limited   •  20 Station Road,  Rowley Regis,  West Midlands,  B65 0JU,  United Kingdom

 T +44 (0) 121 561 6760