AdBlue Tank Cap Remover for PSA Group vehicles
Ideal for removing the tank cap when stuck due to urea crystallisation.
Also allows correct tightening to ensure proper sealing of the system.
Applicable to Citroen / Peugeot vehicles.
For

AdBlue Lever Action Pump
Flexible Delivery Hose : 1.5M
Extraction Tube : 98cm to 120cm
Flow Rate : 20 L/min
Ideal for fast and effective use in the workshop.

AdBlue Electric Drum Pump
With 2M Hose / Manual Dispensing Nozzle and
Telescopic Suction Tube - extends from 850 - 1245mm
Flow Rate : 18.4L/min
For pumping Adblue or
water based liquids and antifreeze from drums of 45G / 205L
or 220 - 275 gallon / 1000 - 1250L IBC tanks.
Compact lightweight construction with On / Off switch and LED indicator.
Includes 230V AC adaptor and 12V Battery Clips
Silent motor keeps noise to a minimum.

AdBlue Plastic Chemical Fuel Dispenser Nozzle
Size : 3/4in.
Flow rate : 5-60 Lpm
Applicable to Mercedes vehicles with BlueTEC
and Citroen BlueHDi models using
AdBlue in conjunction with SCR technology.
Also suitable for various other chemicals
Convenient and portable.

AdBlue Transport Tank - 75L / 12V
Powerful 12V pump capable of delivering up to 10 L/min.
With a working pressure of 40 psi.
4M Power cable for connection to the vehicles 12V battery.
4M EPDM Hose with auto shut-off nozzle.
Dimensions : 1040mm x 520mm x 440mm.
Weight : 17kg
Designed for use in domestic and commercial vehicle workshops.
AdBlue is a registered trademark of VDA.

Heavy Duty Drill Pump
Suitable for Oil and Fluids.
6mm Drill Shaft.
1/2inch diameter Hose.
Max. Output - 1500 L/ph at 3000 rpm
Max. Pumping Height - 15M
Max. Output Pressure - 3 bar at 3000 rpm
Max. Self-priming to 300cm

12 Volt Oil Pump / Extractor
Suitable for diesel heating or motor oil.
Connect to 12 Volt battery using crocodile clips.
Will remove oil using access through the dipstick port.
Complete with all necessary accessories.
NOT suitable for fuel use or flammable liquids.
Ideal equipment for quick and clean oil-changes.

4L Manual Oil and Fluid Vacuum Extractor
For Engine Oil and Water supplied with Funnel and
PVC Tubes : 8mm dia x 1000mm | 10mm dia x 1300mm
For removing engine oil through the dipstick tube.

51mm Mini Diesel Pump with Long Filter
Aluminium Body with Copper Motor Coil.
Voltage : 12V / 24V / 60W
Outlet Diameter : 19mm
Speed : 8500rpm
Diameter : 51mm
Flow : 30 L/min
Head : 3M
Suitable for Diesel / Oil and water.

12V Diesel Fuel Transfer Pump
with Flow Meter and Self Priming Gun.
Ideal for distributing Diesel Fuel or Bio-Diesel.
Voltage :12V / DC
Power : 175W
Load current: 10Amps
Flow : 45 L/min
Suction Hose : 2m
Delivery Hose : 4m

12V Electric Diesel Fuel Transfer Pump
For re-fuelling vehicles or machinery from drums or containers.
Compact and easy to operate with big flow.
Includes
12V Electric Pump
Automotive Filler Nozzle
2M Inlet Hose
4M Outlet Hose
NOT suitable for Petrol use.

Diesel Fuel Electric Drum Pump
With 2M Hose / Manual Dispensing Nozzle and
Telescopic Suction Tube - extends from 850 - 1245mm
Flow Rate : 18.4L/min
For pumping Diesel Fuel
or light oil such as engine oils from drums of 45G / 205L
or 220 - 275 gallon / 1000 - 1250L IBC tanks.
Compact lightweight construction with On / Off switch and LED indicator.
Includes 230V AC adaptor and 12V Battery Clips
Silent motor keeps noise to a minimum.

230V Electric Diesel Fuel Transfer Pump
For re-fuelling vehicles or machinery from drums or containers.
Compact and easy to operate with big flow.
Includes
230V Electric Pump with UK 3pin plug
Automotive Filler Nozzle
2M Inlet Hose
4M Outlet Hose
NOT suitable for Petrol use.

1.5 litre Fuel and Fluid Extractor
For AdBlue / Antifreeze / Brake Fluid / Diesel / Oil / Water.
Also for transmission of fluid / gear oil and engine oil / not ATF.
Suitable for fluid suction and supply during vehicle service.
Clear body for observing fluid content.
Features cap to avoid dripping.
Capacity : 1.5 litre.

1.5 litre Fuel and Fluid Extractor
Connectors for Vauxhall / Opel / PSA vehicles
and two universal connectors for older cars
For removing diesel and petrol from fuel lines.
Quick release connectors.
Prevents spillage

8L Pneumatic Auto Transmission Fluid Extractor and Refill Kit
with 13 Adaptor Set for Audi / Ford / Mercedes / VW.
Extract / transfer and dispense fluid quickly and cleanly
With Pre-set Safety valve for automatic shut-off.
Pressure gauge to read and control pressure.
2 way control valve for dispensing more safely.
13 one touch adaptors for automotive fluid transfer.
Screw valve to switch from extractor to dispenser.
High flow control valve to extract fluid more efficiently.

9L Manual Fluid Extractor
Suitable for extracting oil from vehicles and industrial machinery
also suitable for low-viscosity fluids such as water.
Automatic safety shut off mechanism when the tank is full.
Supplied with 3 tubes : 4mm /

9L Pneumatic Fluid Extractor
Suitable for extracting oil from vehicles and industrial machinery.
Also suitable for low viscosity fluids such as water.
May be used with most standard workshop air compressors.
Automatic safety shut off mechanism when tank is full.
Simple Push Button Use - extract liquids from tanks quickly and easily.
Working Pressure : 70 - 170psi
Air Inlet : 1/4in.
Air Consumption : 5cfm

9 Litre Manual / Pneumatic Fluid Extractor
This Fluid Extractor may be used in conjunction with a compressor
or manually when an air line is not available.
Suitable for extracting oil from vehicles and industrial machinery.
Also suitable for low viscosity fluids such as water.
With 6 and 10mm diameter suction probes and brake bleeding hose.
Working pressure : 70 -170psi
Air inlet: 1/4in.
Air consumption: 5cfm

2M Fluid Transfer Pipe
No need for mouth contact
Liquid flow can be controlled
Works in shallow containers
Simple and long lasting construction

Fluid Transfer Pump
Quick fit nozzle
Dispenses 1floz
Convenient and versatile for difficult access
NOT suitable for brake fluid

Fluid Transfer Pump - 25mm

Fluid Transfer Pump - 32mm

Polypropylene Hand Pump
Suitable for AdBlue
Inlet diameter : 32mm.
Outlet diameter : 25mm.
Flow rate : 0-40 L/min
Total length : 1.3m
Pipe length : 1m

25mm Barrel Pump
Suction Distance : 1.5M
Lift : 5M
Flow Rate : 22 L/Min
Out Diameter : 32mm
Inner Diameter : 29mm
For Fuel Oil / Lubricating Oil and Non-Corrosive Liquids.

Barrel Pump with Plastic Lever Action Handle
Fits 5 to 55 gallon drums with 2in. bung opening.
Dispenses 9 fluid oz per stroke.
For fast transfer of petroleum-based non-corrosive liquids.
With polypropylene housing / Viton seal / telescopic suction tube
and curved spout with standard threaded Male hose connector.

200cc Transfer Pump
Fluid Extractor and Refill Pump
Suitable for brake fluid / coolant / gear oil or power steering fluid.
Semi-translucent cylinder shows fluid volume and fluid condition.
Unique hose coupler offers a positive hose connection.
Includes 2 Tubes : 190 / 197mm with coupler.
Imperial and Metric Scales.

1 Litre Multi-Purpose Pump
Fluid Extractor and Refill Pump
Suitable for brake fluid / coolant / engine and gear oil or power steering fluid.
Multipurpose pump for topping up difficult to access points on Motor Vehicles
Lawnmowers / Chainsaws and other jobs around the workshop and home.
NOT suitable for Fuel and other flammable liquids.
Bottle Capacity : 1L
Hose length : 1M

Multi-Use Transfer Pump
Hand Pump with 51in. / 1300mm Hose < Suitable for a wide range of oils and liquids.

Rubber Ball Style Syphon Pump
380mm short tube and 1100mm long tube.
The Ball Hand Pump retains elasticity and prevents collapse at hot or cold temperatures.
Long-lasting and durable.
Easy to install and replace.
Suitable for Oil / Water / Fuel and Antifreeze.

Electric Syphon Pump
Portable Lightweight Electric Pump for use in your garage / bathroom or outdoors.
Suction Tube : 295mm
Discharge Tube : 600mm
Flow rate : 6L/min
Requires 2 x D batteries / not supplied.

Syphon Pump - Large

Syphon Pump - Large

Syphon Pump Set - 2pc

Spill Saver
with Adjustable flow and flexible clear tube.
For motor oil / transmission fluid and gear oil.
Fits most quart and gallon containers.

Universal Replacement Fuel Can Spout
Fits most plastic cans
Fuel / water easily flows out without the need for other devices.
Flexible Spout with Push-in Vent and Base Caps

Rigid Replacement Spout for Water Jugs
Non Spill Easy Flow Action
with Spout / Cap / Replacement Vent
Secondary Base Cap and Flame Arrestor

Replacement Spout Kit
Spout and Cap with Filter
Second cap for spout or can vent.
1/2in. Replacement push in vent.
Second base cap to fit additional cans.

Capless Fuel Tank Funnel
Ideal for quickly adding fuel additives.
Perfect for adding fuel on the go.
For capless and restricted fuel / filler tanks
Flat spot allows use with CARB compliant spouts

Silicone Folding Funnel
Heat resistant silicone funnel
Also for kitchen and cooking use.
Collapsible for easy storage with support hole.
Size : approx 7.5cm / L x 9cm / H
Suitable for transferring liquids

8in. / 200mm Plastic Funnel
Resistant to Oil / Fuel and some Acids

Long Neck Plastic Funnel
for Multi-purpose use
370mm deep with 130mm diameter mouth

Plastic Funnel with Flexible Nozzle

2 Part Funnel Set
with detachable Flexible Spout

4pc Funnel Set
Sizes : 65 | 85 | 105 | 125mm Diameter

4pc Funnel Set
Sizes : 75 | 90 | 120 | 135mm Diameter

Square Oil Funnel
Holds square and rectangular oil bottles.
Minimize spills with the unique funnel designed.
Safe for use with motor oil and other fluids.
Size: 170 x 95 x 155mm
Plastic : 170 x 95 x 155mm deep

Heavy Duty Plastic Funnel with Removable Filter
Tractor / Garage Funnel
Length : 280mm
Width : 190mm
Depth : 295mm

20L Metal Jerry Can

Flexible Jerry Can Spout
Clips on to most types of jerry can
Suits 5L / 10L and 20L standard jerry cans.
Robust leak free seal.
Fits Neilsen CT1262 Jerry Can.